Assesment for non-cracked concrete
VA CE with internal thread. Option 7 for non-cracked concrete. Stainless steel and INOX A4 versions available
VA F lipped type with o without ETA
= Suitable application = after checking the consistency of the base material
Suitable to fix
- Railings
- Plants engineering
- Beams
- Sections
- Ventilation systems and ceiling heating systems
- Ceiling lighting
- DESCRIPTION
- REQUEST INFO
Versions:- Zinc-plated steel
- A4 stainless steel
Benefits:- Steel anchor with internal thread and internal expansion cone to be used with bolts or threaded bars.
- When the cone is driven in with the apposite impacting tool, the anchor sleeve is spread and thus expands against the hole wall.
- Easy application and quick and safe installation thanks to the proper impacting tool
- The collar of the lipped type avoid the slipping of the anchor inside the hole
- Suitable for bars and accessories with metrical thread
- Possibility of inserting the anchor through the object to be fxed
- Low anchorage depth reduces drilling time and thus cost-effcient installation
- Surface-fush anchor allows the attached items to be removed and reftted several times.
Approved for:- Non-cracked concrete C20/25 to C50/60
Also suitable for:- Non cracked concrete C12/15
- Natural stone with dense structure
Installation:- Pre-setting anchor
- Through-setting only in the version VA
Suggestions for use:- Choose the most suitable accessory in relation to the application to carry out
- Choose the right size of the anchor according to the load
- Always check load bearing capacity values in the table
- Respect the installation data
- Clean the hole before the installation