= Suitable application = after checking the consistency of the base material
Suitable to fix
Bonding insulation boards
Fixing of external composite panels
Insulation of external piping
Sealing of interstitial cavities
Insulation of chimneys and counters
Filling cavities for installation of skylights and windows
Gun adhesive sticks to all common construction materials for filling and fixing gaps in exterior insulation finishing
The high output and powerful initial bond strength enable rapid, efficient panel mounting
The product is ready to use and requires no additional support structures
EIFS gun adhesive is used in place of mortar mixes
Particulary suitable for bonding insulating panels, adheres on most of the building materials (PS, PU, bituminous). Does not adhere on PP, PE, TEFLON and silicons.
Protect from direct sunlight exposure. Overpaintable
Installation yield: 12 sqm.
It is not subject to ageing, but is susceptible to UV radiation damage. Excellent thermal and sound insulation properties
Simple time-saving application
Powerful initial bonding
Low storage space requirement
Construction material B2 according to DIN 4102
Instructions for use:
Shake well before use. Apply fist on the edges of panels, then zig-zag spray on clean, dust- and greasefree surfaces using the specific gun, keeping the can upside down. (moistening surfaces improves adhesion, curing and structure)
Wait about 2 minutes before install and align panels within 15minutes.
Delete possible big surfaces irregularity by applying mortar before placing panels.
In case of rain or wind, protect panels as it takes 2 hours for the adhesive to reach the appropriate mechanical properties.
In case of further applications (over 24 hours after) immediately clean the erogation valve (and the gun) by using Foam Dissolver