Products » Chemical anchors » Self-expanding foams

SELF-EXPANDING PANEL FOAM

Ideal for panels
Download
vorpa en p419830-self-expanding-panel-foam 010 Data sheet

SUPPORT MATERIALS

vorpa en p419830-self-expanding-panel-foam 011
Non cracked concrete
vorpa en p419830-self-expanding-panel-foam 012
Hollow base material
vorpa en p419830-self-expanding-panel-foam 013
Solid base material
vorpa en p419830-self-expanding-panel-foam 014
Plasterboard boards panels
vorpa en p419830-self-expanding-panel-foam 015 = Suitable application vorpa en p419830-self-expanding-panel-foam 016 = after checking the consistency of the base material

Certifications

vorpa en p419830-self-expanding-panel-foam 017
vorpa en p419830-self-expanding-panel-foam 018
vorpa en p419830-self-expanding-panel-foam 019

Suitable to fix

  • External panels
  • Roofing tiles fixings
  • Thermal and sound insulation panels
  • DESCRIPTION
  • vorpa en p419830-self-expanding-panel-foam 020REQUEST INFO
Benefits:
  • Gun adhesive sticks to all common construction materials for filling and fixing gaps in exterior insulation finishing
  • The high output and powerful initial bond strength enable rapid, efficient panel mounting
  • The product is ready to use and requires no additional support structures
  • EIFS gun adhesive is used in place of mortar mixes
  • Particulary suitable for bonding insulating panels, adheres on most of the building materials (PS, PU, bituminous). Does not adhere on PP, PE, TEFLON and silicons
  • Protect from direct sunlight exposure. Overpaintable
  • Installation yield: 12 sqm
  • It is not subject to ageing, but is susceptible to UV radiation damage
  • Excellent thermal and sound insulation properties
  • Simple time-saving application
  • Powerful initial bonding
  • Low storage space requirement
  • Clean application
  • Flammable Class B2 according to DIN 4102
Instructions for use:
  • Shake before using
  • The surface of application must be well cleaned
  • Remove dust, oil and grease
  • Surfaces must be moistened with water
  • Apply upward. In presence of wide hollow materials it is suggested to repeat the application after setting
  • The application can be interrupted in any moment, leave the bottle turned on the gun till completely empty
  • Avoid any contact with sources of ignition, heat, flames
  • Apply fist on the edges of panels, then zig-zag spray on clean, dust- and greasefree surfaces using the specific gun, keeping the can upside down. (moistening surfaces improves adhesion, curing and structure). Wait about 2 minutes before install and align panels within 15 minutes. Delete possible big surfaces irregularity by applying mortar before placing panels. In case of rain or wind, protect panels as it takes 2
    hours for the adhesive to reach the appropriate mechanical properties. In case of further applications (over 24 hours after) immediately clean the erogation valve (and the gun) by using Foam Dissolver

SELF-EXPANDING PANEL FOAM

Would you like to gain further information about this product? Fill in the form and send it.

*Name
*Surname
*Address
*City
*Country
*E-mail address
*Telephone number
Further information
Newsletter
*Privacy
* Mandatory Fields

Related products