Products » Chemical anchors » Chemical bonded anchors

VF CE chemical resin capsule

Assesment for non-cracked concrete.Spin-in resin capsule
vorpa en p419801-vf-ce-chemical-resin-capsule 010
VF CE Option 8 spin-in type


vorpa en p419801-vf-ce-chemical-resin-capsule 012
Non cracked concrete
vorpa en p419801-vf-ce-chemical-resin-capsule 013
Natural stone
vorpa en p419801-vf-ce-chemical-resin-capsule 014 = Suitable application vorpa en p419801-vf-ce-chemical-resin-capsule 015 = after checking the consistency of the base material


vorpa en p419801-vf-ce-chemical-resin-capsule 016

Suitable to fix

  • Starter bar applications
  • Reinforcement bars
  • Threaded studs
  • Crush barriers
  • Machinery - cladding
  • Steel columns
  • Guardrails
  • Noise protection walls
  • Balustrades
  • Chemical anchors VF CE consist of a capsule containing a blend of resin, quarts, sand and special hardener encapsulated in a small glass capsule. The capsule is placed into a drilled hole previously cleaned and threaded rod is driven by machine with turning (simultaneous hammering and turning).

  • Capsules can be set in either direction.
  • Quick curing and gel time.
  • No waste of material. Safe and easy to use.
  • Chemical corrosion resistant.
  • Can be installed in wet concrete or in hole filled with water.
  • Product with ETA option 7 for non-cracked concrete.
  • Suitable for close edge applications, no tension on base material.

Approved for:
  • Non-cracked concrete C20/25 - C50/60​

Also suitable for:
  • Non-cracked concrete C12/15
  • Natural stone

Suggestions for use
  • Avoid direct sunlight.
  • Clean out hole thoroughly before application.
  • Anchors to be tightened with calibrated torque wrench.
  • See ETA for more details

VF CE chemical resin capsule

Would you like to gain further information about this product? Fill in the form and send it.

*E-mail address
*Telephone number
Further information
* Mandatory Fields

Related products

 Various versions available
To be used also with chemical anchor