Assesment for cracked concrete - Fixing in seismic C1-C2
= Suitable application = after checking the consistency of the base material
Suitable to fix
- Heavy duty metal structures
- Heavy structural works
- Construction joints
- Scaffolding links
- Wall ties, starter bars, studs,bolts & large screws
- Electric installations plumbing
Threaded bars
Threaded bars
Structural works
Structural works
structural works
structural works
Structural works
Structural works
- DESCRIPTION
- REQUEST INFO
Versions:
- 300ml cartridge
- 400ml cartridge
Benefits:- Vinylester styrene free chemical anchoring injection system with very high bond strength, developed principally to anchor threaded rods and rebar into concrete
- European Technical Assessment for structural use in cracked concrete
- Approved for seismic applications with performance category C1 and C2
- Suitable for high loads within standard annulus and embedment
- Use in wet or flooded environments (not sea water) and fixing holes
- High durability, resistance to chemicals
- Used for studs and rebar
- Fixing in concrete, wood, or other high strength materials
Approvals-Certifications-Testing:- ETA 23/0228 – M8-M24 and Ø8 to Ø25 for non cracked concrete/M8-M16 for cracked concrete
- ETA 23/0233 hollow Wall / masonry Installations M8-M16
- ETA 23/0227 Post Installed Rebar Installation Ø8-Ø25+Fire Test in ETA
- Tested according to LEED VOC A+ Rating (Volatile Organic Content)
Also suitable for:
Suggestion for use:- Performance based on clean holes.HAMMER DRILLED – blown and then brushed with a stiff metal brush and blown again
Related products
Assesment for cracked concrete - Fixing in seismic C2
Assesment for cracked concrete - Fixing in seismic C1-C2
Assesment for cracked concrete - Fixing in seismic C1-C2